HD Wifi motion detection 5 Port USB Camera / Charger, UK Plug
This product is a 5PORT WIFI charger with built in high-definition camera along with external SD/TF card memory. It integrates a camera with video recording, motion detection, storage, and 5 USB charging slots. HOW TO USE THE 5 PORT WIFI CAMERA1 , Plug in The USB 5 Port Charger camera with the lead provided.2, Once you have connected the 5 Port Charger you are able to charge other devices like your phone, your smart watches and other devices.3, Under the USB camera you will find the card slot, the on/off switch and a female micro USB slot to connect a micro USB lead (not provided) to charge the internal rechargeable batter. (do this later) 4 To switch on the camera flick the little switch (under the 5 port charger), you will see a faint permanent red illimitation signalling the camera device is activated along with a faint slow blue flashing light. Please move the 5 port slightly around looking down into the card slot hole to see the light indicators. 5, Download the LOOK CAM app from either google play or Apple app store.6, Allow Look to find and connect to devices on your local network (wifi)7, Allow LOOK CAM Locations.8, Allow notifications if you would like the full use of your 5 port charger. 9, On the top right of the look cam app hit the + icon to set up device wifi connection. 10, follow instruction to your wifi settings on your phone, you will see an unlocked (padlock icon) wifi network using letters and numbers, select this one. If you don't see this wifi network listed then push the little reset button located under the 5 port charger with a pin holding down for at least 6 seconds and wait for around 30 seconds. Continue to look on your wifi listing where you normally see your own wifi network listing and wait for the new wifi network listing to pop up, again it will be letters and numbers. 11, once the wifi listing pops up, click and connect to it, this is the 5port chargers own network. Go back to the LOOK CAM app and follow instructions.
